 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TLP665G TOSHIBA Photocoupler GaAs Ired & Photo-Triac TLP665G Office Machine Household Use Equipment Triac Driver Solid State Relay The TOSHIBA TLP665G consists of a photo-triac optically coupled to a gallium arsenide infrared emitting diode in a six lead plastic DIP. * * * * * * Peak off-state voltage: 400V (min.) Trigger LED current: 10mA (max.) On-state current: 100mA (max.) UL recognized: UL1577, file No. E67349 Isolation voltage: 5000Vrms (min.) Option (D4) type VDE approved: DIN VDE0884 / 08.87, certificate No. 68383 Maximum operating insulation voltage: 630VPK Highest permissible over voltage: 6000VPK (Note) When a VDE0884 approved type is needed, please designate the "option (D4)" Structural parameter 7.62mm pitch standard type Creepage distance Clearance Insulation thickness 7.0 mm (min.) 7.0 mm (min.) 0.5 mm (min.) 3 1 : Anode 2 : Cathode 3 : N.C. 4 : Terminal 1 6 : Terminal 2 4 2 Unit in mm TOSHIBA Weight: 0.44g 11-9A2 * Pin Configuration (top view) 1 6 1 2002-09-25 TLP665G Maximum Ratings (Ta = 25C) Forward current Forward current derating (Ta 53C) Peak forward current (100 s pulse, 100 pps) Reverse voltage Junction temperature Off-state output terminal voltage On-state RMS current Detector Ta = 25C Ta = 70C LED IF IF / C IFP VR Tj VDRM IT (RMS) IT / C ITP ITSM Tj Tstg Topr Tsol (Note 1) BVS 50 -0.7 1 5 125 400 100 50 -1.1 2 1.2 115 -55~125 -40~100 260 5000 mA mA / C A V C V mA mA / C A A C C C C Vrms On-state current derating (Ta 25C) Peak on-state current (100s pulse, 120pps) Peak nonrepetitive surge current (PW = 10ms, DC = 10%) Junction temperature Storage temperature range Operating temperature range Lead soldering temperature (10s) Isolation voltage (AC, 1 min., R.H. 60%) (Note 1) Device considered a two terminal device: Pins 1, 2 and 3 shorted together pin 4 and 6 shorted together. Recommended Operating Conditions Characteristic Supply voltage Forward current Peak on-stage current Operating temperature Symbol VAC IF ITP Topr Min. 15 -25 Typ. 20 Max. 120 25 1 85 Unit Vac mA A C 2 2002-09-25 TLP665G Electrical Characteristics (Ta = 25C) Characteristic Forward voltage LED Reverse current Capacitance Peak off-state current Peak on-state voltage Detector Holding current Critical rate of rise of off-state voltage Critical rate of rise of commutating voltage Symbol VF IR CT IDRM VTM IH dv / dt dv / dt (c) IF = 10mA VR = 5V V = 0, f = 1MHz VDRM = 400V ITM = 100mA Vin = 120V, Ta = 85C Vin = 30Vrms, IT = 15mA (Note 2) (Note 2) Test Condition Min. 1.0 200 Typ. 1.15 30 10 1.7 0.6 500 0.2 Max. 1.3 10 100 3.0 Unit V A pF nA V mA V / s V / s Coupled Electrical Characteristics (Ta = 25C) Characteristic Trigger LED current Capacitance (input to output) Isolation resistance Symbol IFT CS RS VT = 3V VS = 0, f = 1MHz VS = 500V, R.H. 60% AC, 1 minute Isolation voltage BVS AC, 1 second, in oil DC, 1 minute, in oil Test Condition Min. 1x10 12 Typ. 5 0.8 10 14 Max. 10 Unit mA pF Vrms Vdc 5000 10000 10000 (Note 2) dv / dt test circuit Rin Vin 1 2 3 4 6 RL 2k dv / dtc dv / dt 5V, VCC 0V VCC 120 3 2002-09-25 TLP665G IF - Ta 100 200 IT (RMS) - Ta 80 160 Allowable forward current If (mA) 60 R.M.S on-stage current IT(RMS) (mA) 100 120 40 80 20 40 0 -20 0 20 40 60 80 120 0 -20 0 20 40 60 80 100 120 Ambient temperature Ta (A) Ambient temperature Ta (C) IFP - DR 3000 Pulse width 100s Ta = 25C 100 50 30 Ta = 25C IF - VF Allowable pulse forward current IFP (mA) 500 300 (mA) 10 1000 Forward current IF 10-3 10-2 10-1 5 3 1 0.5 0.3 100 50 30 10 3 3 3 3 10 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Duty cycle ratio DR Forward voltage VF (V) VF / Ta - IF -3.2 1000 500 IFP - VFP Forward voltage temperature coefficient VF / Ta (mV / C) (mA) IFP Pulse forward current -2.8 -2.4 -2.0 -1.6 -1.2 -0.8 -0.4 0.1 300 100 50 30 10 5 3 Pulse witdh 10s Repetitive Frequency = 100Hz Ta = 25C 1.0 1.4 1.8 2.2 2.6 0.3 0.5 1 3 5 10 30 50 1 0.6 Forward current IF (mA) Pulse forward voltage VFP (V) 4 2002-09-25 TLP665G Normalized IFT - Ta 3 2 VT = 3 V 3 2 Normalized IH - Ta Trigger led current IFT (mA) (arbitrary unit) 1.2 1 Holding current IH (mA) (arbitrary unit) -20 0 20 40 60 80 100 1.2 1 0.5 0.5 0.3 0.3 0.1 -40 0.1 -40 -20 0 20 40 60 80 100 Ambient temperature Ta (C) Ambient temperature Ta (C) Normalized IDRM - Ta 103 Normalized VDRM - Ta 1.4 VDRM VDRM = Rated Peak off-state current IDRM (arbitrary unit) 1.2 102 Off-state output terminal voltage (arbitrary unit) 20 40 60 80 100 1.0 0.8 101 0.6 0.4 10 0 0.2 -40 -20 0 20 40 60 80 100 Ambient temperature Ta (C) Ambient temperature Ta (C) Normalized IF / IFT - Pw 10 Normalized led current IF / IFT 5 3 2 1.6 1.2 1 10 30 50 100 300 500 1000 Led current pulse wide Pw (s) 5 2002-09-25 TLP665G RESTRICTIONS ON PRODUCT USE 000707EAA * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 6 2002-09-25 |
Price & Availability of TLP665G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |